Author Topic: 2008 Outback 425 Carb  (Read 144 times)


  • Newbie
  • *
  • Posts: 1
2008 Outback 425 Carb
« on: September 26, 2017, 06:56:30 AM »
Can't start - Engine Have Spark - engine is turning over - I have two black tubes that are connected to the carb bur nothing on the other end. One is thicker goes in near where air intake is - The other is just above the float bowl - smaller tube - next to what looks like a electrical connector  (flat piece that a female connector could connect to.

Need top know if anyone can send a diagram of how they should connect  - Picture would be great


  • Administrator
  • Hero Member
  • *****
  • Posts: 829
  • Personal scooter consultant to the rich & famous
    • Whidbey Island Moped
Re: 2008 Outback 425 Carb
« Reply #1 on: September 28, 2017, 08:42:11 AM »
you have a CV carb on that ATV it has
2(+1) hoses ,one for fuel and one for vacuum.
and usually one drain hose for fuel overflow unless it got knocked off.

fuel usually is the bigger of the 2 tubes
find the fuel shut off the gas line should go to there.
the vac line usually comes  from the intake manifold should be a
fitting for a hose

i own a scooter shop  with rentals ,sales& racing parts.
i also appraise scooters for KBB.

2003 Vino classic stage 0.75
de-reged stock variator w/8g sliding weights.
1.5k rpm  springs
2005 veniceLX ~70cc~upjet~1.5k rpm springs & 7gr sliders
KeyWest de restricted~8gr slide