Login
Register
Menu
Home
Help
Search
TGBForum.com
TGB Scooter And ATV Enthusiast Forum
TGBForum.com
»
Scooters
»
Key West
»
50/70cc Racing Exhaust
50/70cc Racing Exhaust
Guest ·
3 ·
3773
« previous
next »
Print
Pages:
1
WisconsinKeyWester
Guest
50/70cc Racing Exhaust
on:
July 28, 2009, 10:26:33 AM
Hello Everyone,
Just thought I'd tell those who are looking to upgrade their pipe what a benefit it is. I went with the MRP 50/70cc racing exhuast and I say 50/70cc because this pipe will work with my stock cylinder that's a 50cc and it will also work with a big bore kit it at 70cc if you chose to upgrade later on. For performance I was running around 40-42mph without the pipe but instantly when I put it on I would get 49mph on flat ground and buried the speedo over 50 down any kind of decline. N-MP-02060 is the part number. This pipe will work with a little tlc. You'll have to buy two 3inch long 10mm standard thread screws because the stock ones are too short. Also make sure to take care of your stock gasket to reuse because its just one less hassle. Also you'll need to either remove or bend your main stand, I took mine off and it looks pretty cool with just the kickstand.
http://www.whidbeyparts.com/SPD/n-mp-02060--80000CD8-1200671303.jsp
if you're looking for a link.
mizzle88
Guest
Re: 50/70cc Racing Exhaust
Reply #1 on:
August 17, 2009, 01:19:32 PM
yeah, that is a pretty good increase for just a new exhaust. personally though i wouldn't spend that kind of money for a performance upgrade on a moped. save up a lil more and you can buy a cheap bike that will go a lot faster.
harry
Administrator
Hero Member
Posts:
901
Personal scooter consultant to the rich & famous
Re: 50/70cc Racing Exhaust
Reply #2 on:
August 17, 2009, 03:37:17 PM
yeah they go fast when you do a few things to them
if anyone wants unlimited cdi's or the weights let me know
heres the link to the cdi:
http://whidbeyislandmoped.com/cart/index.php?main_page=product_info&cPath=17&products_id=2
and the sliding weights :
http://whidbeyislandmoped.com/cart/index.php?main_page=product_info&cPath=11&products_id=38
and the clutch:
http://whidbeyislandmoped.com/cart/index.php?main_page=product_info&cPath=9&products_id=168
the cdi doesn't work on the R50x sorry ...also the TGB 107mm clutch doesn't work on the
newer TGB's
if you just do the cdi & weights (go 9gr) and remove the ring in the variator you will get around 45mph
the total cost is about $65 plus shipping.
oilyhans
i own a scooter shop with rentals ,sales& racing parts.
i also appraise scooters for KBB.
2003 Vino classic stage 0.75
de-reged stock variator w/8g sliding weights.
1.5k rpm springs
42mph
2005 veniceLX ~70cc~upjet~1.5k rpm springs & 7gr sliders
46mph
KeyWest de restricted~8gr slide
Print
Pages:
1
TGBForum.com
»
Scooters
»
Key West
»
50/70cc Racing Exhaust
Search
Username
Password
Always stay logged in
Forgot your password?