Help Needed...

[grioghair]

I just changed my gear oil on my tgb delivery 50, and I torqued the top off of the drain bolt. It is not leaking, so no emergency...but I need to know how to remove it. How am I going to get that bolt out?

Also, I am probably going to need a couple of inlet/drain bolts for backup. Can you order those for me please.

Thank you,

Grioghair

[harry]

yikes!   get yourself a stubby 3" ratchet  for working on your scooter
and you'll tighten stuff just about right without twisting things off .
check the bolt head is it kinda crystalline or a spiral  with a point in the center?
    crystalline is bad metal  , spiral is to much force.

as for removal  lots of ways  drill a hole and use a easy out thats the best way.
you can use a crescent wrench with good jaws to hold it  or buy the  tap handle .

buy a removal tool  i forget the name but it has a reamer on
one end and a remover on the other its about like 2" long and
hex like a  Phillips bit for drill . still have to drill .

oilyhans