Modification List

red-r50x · **on:** May 17, 2009, 04:33:48 PM

To try and help out myself, as well as all the other scooter noobs on here, would people be able to post their list of modifications in order or important/quality/recommendation to theirselves personally.

Just to try and keep it all in one topic for any beginners.

harry · **Reply #1 on:** May 18, 2009, 08:02:48 PM

the pipe is most bang for the buck
read this for where to get the stuff.
http://tgbforum.com/forum/index.php?topic=83.msg292#msg292

or just the rave
http://tgbforum.com/forum/index.php?topic=83.msg325#msg325

oilyhans

red-r50x · **Reply #2 on:** May 18, 2009, 09:02:59 PM

-thank you

It looks like you are all over this forum so what would be the top 3 or 5 things to do to your r50x after you get it. The Pipe sounds good and everything but it is like 225.00 plus. So i have herd get the 70 jets. And the link you sent to that other guy about the CDI regulators was that the good one or the bad one not to get. If i get a Clutch what a should i get and for what you get out of it is it worth it? The variators and the sliding weights good idea?

~Thanks alot sorry about all the questions
just a person trying to find the best BANG! for my buck
just like you said.

RushNatU · **Reply #3 on:** May 20, 2009, 06:38:56 PM

To my knowledge the r50x does not have a CDI restriction. Mine came only with the washer in the variator. I got the pipe and have no problem revving to 9000 @ 52mph. The pipe is the biggest bang for the buck. If you get the 70cc you will get a little more top end and a lot of bottom end torque but without the pipe the 70cc kit is a waste. The pipe added a good 15-17mph (speedo indicated, actual is less) to the top end and made a huge difference in acceleration. I highly recommend it.

red-r50x · **Reply #4 on:** May 22, 2009, 06:55:24 AM

ok thanks alot will have to look for one!

r70x · **Reply #5 on:** May 23, 2009, 06:38:26 AM

Go a good pipe first,its easy to mod any pipe,just make sure that it goes on a Morini engine.From what I've found all you need to look for is anything that'll go on Suzuki Address or italjet Formula 50 scooters.I personally wouldnt get a MRP pipe for it,unless you want the loudest scooter in town,I put a Tecnigas Next R on mine and it works very well,great mid range,with the right weight rollers in the variator,you just wind up the clutch to about 6500rpm and then let it go.Then go a good 70cc kit,,Polini,Malossi,stage6,for example ,they're all good,personally I've tried the Polini and Malossi kits and I like the Polini 70cc kit more,but its all up to the rider.Remember that it is tuning and what works for me may not work for you.
GOOD LUCK WITH IT,,,,ENJOY THE RIDE

harry · **Reply #6 on:** May 23, 2009, 12:33:24 PM

Here's list of parts for modding TGB scooters
Some parts are discontinued

MRP racing exhaust for the R50X part # N-MP-02059 other 50cc TGB units use the N-MP-02046.
TGB TGB 303, Lazer, and RX 50cc N-MP-02046 MRP 50cc / 70cc Racing Exhaust for 303 and Lazer Franco Morini N-MP-03404 TGB Main Spring 303, RX 50, Key West P 249.008 Polini TGB / Minarelli 107mm Racing Clutch 303, Key West, RX 50 P 241.400 Polini Racing Variator with rollers for 303 and Key West P 250.004 Polini Racing Clutch Bell TGB 303, RX 50, Key West P 248.014 Polini Kevlar Belt for 303 / Speedflight Peugeot P 248.041 Polini Kevlar Belt for 101, RX 50, and Key West TGB Part # GE506RB01 C1-6-09 N-MP-09495 MRP 47mm 70cc Franco Morini Upgraded Cylinder Kit Piston, Rings, Head, Cylinder for 303, RX 50, and Key West Check Rollers Section 50cc TGB units use 17x12 rollers and sliders N-MP-03537 107mm Racing Clutch for TGB 50cc, Hyosung Prima, UM X-Peed 50.
TGB RX 50 N-MP-03530 Maximum Performance Variator TGB RX 50 N-MP-02059 Racing Exhaust 50cc / 70cc R50X TGB RX 50 Clutch TGB RX 50 uses a 105mm Clutch and 107 Clutch Bell N-SM -0704 Main Jet upgrade Check Rollers Section 50cc TGB units use 17x12 rollers and sliders

Look here for the parts:
Whidbey Island Moped

oilyhans

rjbosco · **Reply #7 on:** May 23, 2009, 12:52:09 PM

My dealer tried to put a Tecnigas Next R on my R50X and he told me it wouldn't fit (because of the disc brake caliper). How did you get it to fit?

r70x · **Reply #8 on:** May 23, 2009, 03:45:25 PM

Hey,
Putting the Tecnigas Next R pipe on the r50x is a little problem,but nothing too bad,I just cut a small section on the header pipe section and put in an extra piece,just enough to go out far enough.Make sure that you make up a jig from the original pipe to give you some idea of the clearance,I took it out just a little more, to make sure that it would fit.If you're no good with tools or you don't have access to welding machine,take it all down to a local metal shop,I'm sure they'll be able to help you.

GOOD LUCK WITH IT,,,,,ENJOY THE RIDE.......

LowJexfloolve · **Reply #9 on:** September 06, 2009, 12:10:25 PM

Im looking to put together a few pages of some of my sites to do items that I want certain people admins, mods, etc to be able to see and volunteer for handling. Basically, it should a list of items and a space next to each one that someone can put down that they will be handling. Im sure I can figure something out to do this, but is there a mod or something premade that will do this?

Thanks in advance for your help.

EXAMPLE
- Write Article about X User 1
- Add People to Group Y User 2

Where the user part can be modified by selected users.