how to derestrict

[mizzle88]

i am trying to remove the restrictor washing but i having trouble getting the variator assembly off. i read there should just be a nut, but there doesn't seem to be...can someone help me out?

[harry]

ride your scooter for at least 300 miles first.
kiss your warranty good by , and remember you will
now go faster than allowed.

buy a impact wrench air or electric.
also buy a (5/6mm?)allen  wrench 3/8" drive  or whatever the
the size of wrench you buy. try harbor freight if your a poor student type.

1. use the allen wrench  remove 3 screws
NOTE; don't break the fins!
remove k.starter assy.
2.remove nut
NOTE; the nut is REVERSE threads.
with caution slide off the variator fan.
try not to move the v belt on the other pulley
now you will see the brass ring
slide it to you.
REVERSE steps to reassemble

oilyhans

[mizzle88]

ha, thanks for the tip with the impact wrench, i tried for like an hour using a strap wrench and a ratchet with no luck, then went over to my neighbors and used his impact wrench and it came off in a second. unfortunately there was no washer there, so either the dealer had already taken it off, or 2006's just don't have it, but thanks anyways!

[harry]

the dealer or previous owner removed it.
your stock  carb is under jetted  they use a #60
upjet  to a #65  or so
http://whidbeyislandmoped.com/cart/index.php?main_page=product_info&cPath=10&products_id=25

oilyhans

[mizzle88]

yup, i have a new main jet in transit, along with a new air filter, so i am hoping that will help a little bit

you have any suggestions for new roller weights? or any other cheap mods?